Coming soon


LV320 is a 64-bit/32-bit (Intel® EM64T) operating system compatible server motherboard designed specifically for the Intel® Xeon family of processors. It supports all Xeon processors current and forthcoming, with Front Side Bus that blazes at the speed of 800MHz and with DDR2-400 memory bus.

LV320 runs state of the art E7320 chipsets that provide seamless integration with Intel® Xeon processors running at 800MHz and enhanced memory bus that outputs at faster rate than ever before. LV320 supports up to 16 GB DDR2-400 registered memory using dual channel memory bus in the space of 8 240-pin DIMM slots that achieves a fine balance of spacing saving and memory power.

LV320 is designed with a far outlook that anticipates the growing use of Serial ATA 2 drives. It uses an innovative design to support up to 8 SATA-2 ports, a feature not found in any other motherboards, providing the coveted hot plug feature and yet stays backward compatible with SATA-1.

LV320 supports 2 Gigabit Ethernet ports to provide for teaming with load balancing and fail over, making it the ideal motherboard for a firewall system or any system that operates in a highly dynamic and highly available computing environment.

LV320 comes with various combinations of manufacturing options that allow it to fit 1U system. This flexibility also eliminates the hassles of testing a number of boards for qualification. All these benefits come at only a tiny to zero cost to the customer.

Other features that make LV320 a most effective choice included : 3 independent PCI-X/PCI buses, Two 64-bit 133/100MHz (3.3V) PCI-X slots, PXE option ROM solution, National Semiconductor Super I/O PC87360 chip, and Baseboard Management Controller (BMC) system management solution.

Product Skus


Serial ATA 2

PCI-X/PCI slot













  • Dual Intel® Xeon CPUs (Nocona)
  • Compliant VRM 10.1
  • 800MHz Front Side Bus


  • Intel® E7320 + ICH5 + PXH  + FWH
  • National Semiconductor Super I/O PC87360 chip
  • Analog Devices ADM1026 Hardware Monitor chip

Main Memory

  • Eight 240-pin 1.8-Volt DDR2 DIMM sockets
  • Dual channel memory bus
  • Two-way interleaved memory banks (pair of DIMMs required)
  • Supports DDR2-400 memory
  • Supports Registered ECC type memory modules only
  • Supports up to 16GB
  • Supports Mirroring, Sparing and Chipkill

System BIOS

  • 8Mb Phoenix BIOS
  • Legacy USB support
  • MP 1.1 & 1.4 compliant
  • SMBIOS 2.3.3
  • DMI 2.0 compliant
  • Soft Power-down
  • Multiple boot support (with BIOS Boot Specification v3.1 (BBS) support)

Mass Storage I/O

  • Provides two PCI bus master channels for up to four enhanced IDE devices

  • Support for UDMA 100/66/33 IDE drives and ATAPI compliant devices

  • Integrated 2 ports Serial ATA from Intel ICH5

PCI Slots
  • Three independent PCI-X/PCI buses

  • Two 64-bit 133/100MHz (3.3V) PCI-X slots

  • One 32-bit 33MHz (5V) PCI slot

  • Total of three usable slots


  • Integrated ATI RageXL video controller with 8MB memory

Integrated Serial ATA 2

  • 4/8 Ports PCI-X Marvell/Adaptec Hercules2 SATA-2 Controller  [optional]
  • Zero Channel RAID (ZCR) solution (Intel RAIDIOS logic over PCI-X slot)
  • Hard disk hot swap solution
  • Adaptec Host-RAID option ROM and driver solution
  • DMA Transfers up to 3.0Gb/s

Integrated LAN controller

  • Intel 82546GB Gigabit Ethernet LAN controller
  • Two RJ-45 connectors with LEDs
  • Two 4-pin headers for front panel LED output

Onboard Multi I/O

  • National Semiconductor Super I/O PC87360 chip
  • One floppy connector
  • PS/2 mouse and PS/2 keyboard connectors
  • Two 9-pin serial ports (one rear  and one header)
  • Four USB 2.0 ports (2 rear and 2 headers)

System Management

  • Baseboard Management Controller (BMC) system management solution
  • IPMI 1.5 compliance with Arima Scorpio server management card (optional)

M/B Size

  • SSI form factor with size: 12ā€¯ X 13ā€¯ (8 layers)
  • EPS 12V power connectors (24pin + 8pin)


Welcome to Rioworks