Dual-capable RAID-ready

 

 

PDB-R, a dual processor motherboard of PentiumIII 450~650MHz, integrates the disk fault-tolerant solution of the embedded RAID to protect the data availability. It is a cost-effective system of the UltraDMA/66 IDE RAID o, 1 and 10 to the most valuable choice for both of customers to the entry server and the professional workstation - the reliable data-protection and high-throughput of data Input/Putput rate.

Processor
  • Dual Slot-1
  • Support dual Intel Pentium III 450-650+
  • Integrated VRM complies to spec 8.4
Chipset
  • Intel 440BX/Dual Processors
  • Winbond W83977 Super I/O controller
  • Promise PCI UltraDMA/66 RAID controller
  • Integrated the IOAPIC( Input/Output Advanced Programmable Interrupt Controls ) symmetric multiprocessor
System BIOS
  • AMI BIOS
  • Wire for Management 2.0
  • Wake On LAN
Onboard Multi I/O
  • Winbond super I/O and hardware monitor
  • Two serial ports with UART 16550
  • One parallel port with ECP/EPP support
  • Dual onboard USB connectors
  • PS/2 mouse and keyboard connectors with Wake-up function
Main Memory
  • Four standard 168-pin SDRAM DIMMs
  • Up to 1GB ECC memory
Expansion Slots
  • 4 PCI, 2 ISA, 1 PC/ISA, 1 AGP2X
On Board PCI IDE
  • Dual PCI Bus Master UltraDMA/33 IDE channels
  • Connect up to the four UltraDMA/33 IDE devices
On Board PCI IDE RAID
  • Plus two more PCI Bus Master IDE channels
  • The dual UltraDMA/66 channels of IDE RAID integrated, up to four UltraDMA/66 IDE devices
  • RAID 0: disk striping for performance
  • RAID 1: disk mirroring for data-replication
  • RAID 10: disk striping and mirroring
ATX Power Connector
  • 3V, 5V, 5Vstandby and 12V 20-pin
  • Support Wake on LAN
Hardware Monitor, System Management
  • Hardware monitor of CPU Thermal Protect, CPU/System Fan monitor, Voltage Report, Chassis Intrusion
  • RioworksTM SmartWatchTM to alert the event of hardware problem
  • Prevent from abnormal system down/dataloss
  • Header of Wake On LAN to support the power on features via Ethernet LAN
  • System/IO-bus 100MHz Front Side BusAGP2X bus
Board Size
  • ATX form factor with size: 9.6" x 12"




Welcome to Rioworks
Http://www.rioworks.com