
R3122 is Rioworks's first 64-bit high computing power
1U rackmount server. By leveraging the power of AMD® Opteron
processor, customers can run existing 32-bit applications faster
than ever before. With memory controller hub built-in Opteron, R3122
supports dual AMD Opteron processors up to 2.2GHz and eight registered
DDR400/333 memory DIMMs with total up to 16GB DDR400/333 registered memory.
R3122 also features dual gigabit LAN ports, a 64-bit PCI-X riser
slot and 2 IDE hard disk trays. For reliability, Rioworks provides
an IPMI 1.5 connector for advance server remote management card
- ARMC (Arima Remote Management Card) with user friendly GUI. R3122
offers the highest density of 64-bit enterprise computing power
available today.
|
Processor
- Dual AMD®
Opteron PGA Socket 940 CPUs
- Supports up to Opteron 248 2.2GHz and plus
- Onboard VRD
HyperTransport
Chipset
- AMD®
8111 [HyperTransport I/O Hub]
- AMD®
8131 [PCI-X Tunnel]
Main Memory
System BIOS
- 4MB Flash EEPROM with Phoenix BIOS
- I2C support
- Legacy USB support
- SMBIOS 2.3 compliant
- DMI 2.0 compliant
- Soft Power-down
- Secure Boot
- Multiple boot support
IDE Bus
- Dual channel master mode
- Supports up to four Enhanced IDE devices
- Ultra DMA 133/100/66/33
Drive configuration
- 2 * Parallel ATA HDD bays
- 1 * slim CDROM
- 1 * slim FDD
Expansion Slots
- One 64-bit PCI-X riser card slot
VGA
- Integrated ATI RageXL video controller with 8MB memory
LAN
- Dual Broadcom 5702 Gigabit Ethernet controllers onboard
- Supports Fault-Tolerance and Fail-Over
Onboard Multi I/O
- 1 + 1 (9-pin) serial ports with UART 16550
- One VGA port
- Dual RJ-45 LAN ports
- Two onboard USB1.1 connectors with Two external header
- PS/2 mouse and keyboard connectors with Wake-up function
System Management
- Super I/O PC87360
- Hardware Monitor AD1026
- AMC connector for BMC (Base-board Management Controller)
- Rioworks SmartWatch server management software
Front panel control
- Three switches for Power, Reset and Mute
- Power on LED
- LAN LEDs
- One dual-color Fail/Mute LED
- HDD power/access LEDs
- Two USB ports at front panel accessible
System cooling fans
- 2 x 9.5cm blower fans in the middle of the chassis
- 1 x 9.5cm blower fan in the rear of the chassis
- Fan status light and Alarm functions included
Case Size
- 705mm (D) x 430mm (W) x 44mm (H)
|