Performance Density 1U/2U Server



SDRCB scales up the whole system performance from supporting of CPU 133FSB, PC133 memory and the 64bit/66MHz PCI bus with dual Ultra3 SCSI supporting. Furthermore, SDRCB integrating dual NIC controller plus onboard VGA solution is the optimized configuration for 1U/2U server application, focus on performance density.
This performance density SDRCB also reserves a 3 PCI slot riser for user expansion.

  • Dual FC-PGA: Coppermine 533MHz-1GB+
  • Integrated VRM complies to spec 8.4
  • RCC Champion 3.0LE Dual Processor capability for 133 Front Side Bus, PC133 Memory, and 64bit/66MHz PCI slots supporting.
  • 64bit/66MHz PCI slots
System BIOS
  • I2O support
  • Legacy USB support
  • MP 1.1 & 1.4 compliant
  • SMBIOS 2.3 compliant DMI 2.0 compliant
  • Advanced IDE(supports bigger than 8GB HDD with S.M.A.R.T.) features
  • Soft Power-down Secure Boot
  • Multiple boot support
  • 133/100 Front Side Bus PC133 Memory
Main Memory
  • Four 25 degree angle DIMM slots supports up to 4GB SDRAM memory capability ECC memory
Onboard Dual SCSI
  • Dual ultra3 SCSI channels for bandwith up to 320MB/s
Onboard Multi I/O
  • Winbond super I/O with hardware monitor
  • Two serial ports with UART 16550
  • One parallel port with ECP/EPP support
  • Dual onboard USB connectors
  • PS/2 mouse and keyboard connectors with Wake-up function
Performance PCI Bus
  • Three 64bit/66MHz PCI slots and three 32bit/33MHz PCI slots are PCI 2.2 compliant
  • 64bit/66MHz provides PCI bandwith 533MB/s vs 133MB/s(32bit/33MHz)
ATX Power Connector
  • 3V, 5V, 5Vstandby and 12V 20-pin
  • Support Wake on LAN
Hardware Monitor and System Management
  • Hardware monitor of CPU Thermal Protect, CPU/System Fan monitor, Voltage Report, Chassis Intrusion
  • RioworksTM SmartWatchTM to alert the event of hardware problem
  • Prevent from abnormal system down/data loss
  • Header of Wake On LAN to support the power on features via LAN
  • IPMI compliance feature connector for MegaRAC
Expansion Slots
  • 6 PCI (3*64bit/66MHz 3*32bit/33MHz)
Board Size
  • ATX form factor with size: 12" x 13"

Welcome to Rioworks