SDVIA, a dual processor motherboard of Pentium III Coppermine (FC-PGA), provides the powerful platform to satisfy today's needs on highly integrated workstation or sub-entry's server. With the latest AGP PRO slot, users can enjoy the most advanced / high-end graph cards with ease. The IDE RAID chip on board will boost up the data transfer rate (RAID level 0) or protect the disk data by replication (RAID 1) without putting too much strain on CPU, comparing with the software-based RAID. Further, the most up-to-date technology of ATA/100 will also enhance the data transfer rate up to 100MB/s. To sum up, SDVIA delivers high performance and true workstation/ server functionality at affordable price range.

Processor
  • Dual socket 370 solution
  • Intel Pentium III Coppermine FC-PGA (133/100MHz FSB)
  • Integrated VRM complies to spec 8.4
Chipset
  • VIA Apollo Pro133A
System BIOS
  • Award BIOS on 2Mb flash
  • S3, Suspend to memory
  • Legacy USB support
  • Wire for Management 2.0/Wake On LAN
  • Jumper free setting by software
  • CPU host bus frequency setting table
System/IO-bus
  • 100/133 MHz FSB
  • Support overclocking 150FSB or higher
  • AGP Pro
  • 100/133 MHz system memory bus
  • Ultra DMA 33/66/100 EIDE
Hardware Monitor and System Management
  • Hardware monitor of CPU Thermal Protect, CPU/System Fan monitor, Voltage Report, Chassis Intrusion
  • RioworksTM SmartWatchTM to alert the event of hardware problem
  • Prevent from abnormal system down/dataloss
Expansion
  • Slots 6 PCI , 1 AGP Pro
Onboard Multi I/O
  • Winbond super I/O with hardware monitor
  • Two serial ports with UART 16550
  • One parallel port with ECP/EPP support
  • Dual onboard USB connectors
  • PS/2 mouse and keyboard connectors with Wake-up function
Onboard Lan Chip
  • Intel 10/100 Ethernet
System Memory
  • Four DIMM slots up to 2GB system memory
  • PC100/133 SDRAM
  • Advance ECC memory controller supporting SDRAM, VCM.
Onboard IDE RAID
  • Two channels and up to four drives
  • ATA/100 Compatible
  • RAID Level 0, 1, 10
Onboard Multi I/O
  • Two 9-PinSerial Ports with UART
  • One parallel port with ECP/EOO Support
  • Dual onboard USB connectors
  • P/2 Keyboard and mouse connectors with wake-up function
  • One LAN port
Board Size
  • ATX form factor with size: 12.1" x 9.8"




Welcome to Rioworks
Http://www.rioworks.com