Value 1U Dual PIII System



SDVIB, a dual processor motherboard of Pentium III Coppermine (FC-PGA), provides the powerful solution to satisfy today's needs on cost-sensitive and performance-density server platform. The IDE RAID chip on board will boost up the data transfer rate (RAID level 0) or protect the disk data by replication (RAID level 1) without putting the strain on CPU, comparing the software-based RAID.
With the integration of dual NIC controllers plus VGA solution onboard, these optimized features will be utilized to the fast growing 1U/2U server application.

  • Dual socket 370 solution or single Celeron (66/100 FSB) platform
  • Intel Pentium III Coppermine FC-PGA (133/100FSB)
  • Integrated VRM complies to spec 8.4
  • VIA Apollo Pro 133A with south bridge VT82C686B
System BIOS
  • Award BIOS on 4Mb flash
  • I2O support
  • Legacy USB support
  • MP 1.1 & 1.4 compliant
  • SMBIOS 2.3 compliant
  • DMI 2.0 compliant
  • Wire for Management 2.0/Wake On LAN
  • APM 1.2/ACPI 1.0
  • LS-120, Iomega zip support
  • MO, DVD and CD-ROM support
  • Advanced IDE (supports bigger than 8GB HDD with S.M.A.R.T.) features
  • Soft Power-down
  • Secure Boot
  • Multiple boot support
  • Y2K compliant/PC99 compliant
  • Auto reset after overclocking
Hardware monitor,System management
  • Hardware monitor of CPU Thermal Protect, CPU/System Fan monitor, Voltage Report, Chassis Intrusion
  • RioworksTM SmartWatchTM alerts the event of hardware problem, prevents from abnormal system down/data loss
  • Header of Wake On LAN to support the power on features via Ethernet LAN
  • 66/100/133 MHz FSB
  • 100/ 133 MHz system memory bus
  • Ultra DMA 33/66/100 EIDE
System Memory
  • Four DIMM slots up to 2GB system memory
  • Advance ECC memory controller supporting SDRAM, VCM, EDO and FP
Onboard IDE RAID
  • Two channels and up to four drives
  • ATA/100 Compatible
  • RAID Level 0, 1, 10
Onboard LAN Chip
  • Two Intel 10/100 Ethernet controllers
Onboard VGA
  • ATI Rage XL with 4MB Memory onboard
ON board Multi I/O
  • One 9-Pin Serial Port with UART
  • One parallel port with ECP/EOO Support
  • Dual onboard USB connectors
  • PS/2 Keyboard and mouse connectors with wake-up function
  • Two RJ45 Ethernet Jack
  • One VGA output
Expansion Slots
  • 3x PCI,
Board Size
  • ATX form factor with size: 12" x 9.6"

Welcome to Rioworks